new product esh1pb, esh1pc, esh1pd vishay general semiconductor document number: 88895 revision: 11-nov-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 high current density surface mount ultrafast rectifiers features ? very low profile - typical height of 1.0 mm ? ideal for automated placement ? glass passivated chip junction ? ultrafast recovery times for high frequency ? low forward voltage drop, low power loss ? low thermal resistance ? meets msl level 1 per j-std-020, lf maximum peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. mechanical data case: do-220aa (smp) epoxy meets ul 94 v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: color band denotes cathode end primary characteristics i f(av) 1.0 a v rrm 100 v, 150 v, 200 v t rr 25 ns v f 0.90 v t j max. 175 c do-220aa (smp) esmp tm series maximum ratings (t a = 25 c unless otherwise noted) parameter symbol esh1pb esh1pc esh1pd unit device marking code pb pc pd maximum repetitive peak reverse voltage v rrm 100 150 200 v maximum average forward rectified current (fig. 1) i f(av) 1.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 50 a operating junction and storage temperature range t j , t stg - 55 to + 175 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol value unit maximum instantaneous forward voltage (1) i f = 0.7 a i f = 1 a t j = 25 c v f 0.86 0.90 v maximum reverse current at rated v r voltage (2) t j = 25 c t j = 125 c i r 1.0 25 a maximum reverse current v r = 20 v t j = 150 c i r 50 a
new product esh1pb, esh1pc, esh1pd vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88895 revision: 11-nov-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms note: (1) thermal resistance from junction to ambient and junction to lead mounted on p.c.b. with 5.0 x 5.0 mm copper pad areas. r jl is measured at the terminal of cathode band. r jc is measured at the top center of the body note: (1) automotive grade aec q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) maximum reverse recovery time i f = 0.5 a, i r = 1 a, i rr = 0.25 a t rr 25 ns typical reverse recovery time i f = 1.0 a, v r = 30 v, di/dt = 50 a/s, i rr = 10 % i rm t j = 25 c t j = 100 c t rr 25 35 ns typical stored charge i f = 1.0 a, v r = 30 v, di/dt = 50 a/s, i rr = 10 % i rm t j = 25 c t j = 100 c q rr 10 15 nc typical junction capacitance 4.0 v, 1 mhz c j 25 pf electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol value unit thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol esh1pb esh1pc esh1pd unit typical thermal resistance (1) r ja r jl r jc 105 15 20 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode esh1pb-e3/84a 0.024 84a 3000 7" diameter plastic tape and reel esh1pb-e3/85a 0.024 85a 10 000 13" diameter plastic tape and reel esh1pbhe3/84a (1) 0.024 84a 3000 7" diameter plastic tape and reel esh1pbhe3/85a (1) 0.024 85a 10 000 13" diameter plastic tape and reel figure 1. forward current derating curve 0 1.2 95 105 115 125 135 145 155 165 0. 8 1.0 0.2 0.4 0.6 175 t l meas u red at the cathode band terminal lead temperat u re (c) a v erage for w ard re ctified c u rrent (a) figure 2. maximum non-repetitive peak forward surge current 1 10 100 10 20 30 0 40 50 nu m b er of cycles at 50 hz peak for w ard s u rge c u rrent (a)
new product esh1pb, esh1pc, esh1pd vishay general semiconductor document number: 88895 revision: 11-nov-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical revers e leakage characteristics 0.4 0.6 0. 8 1.2 1.4 0.1 10 1 100 0.01 1.0 0.2 1.6 t j = 150 c t j = 125 c t j = 175 c t j = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 20 40 60 8 0 100 0.1 1 10 100 10 30 50 70 90 0.01 1000 t j = 150 c t j = 125 c t j = 175 c t j = 25 c percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent ( a) figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0.1 10 1 100 1 100 10 1000 re v erse v oltage ( v ) j u nction capaci tance (pf) 0.01 10 1 100 1 10 100 0.1 1000 t - p u lse d u ration (s) transient thermal impedance (c/ w ) do-220aa (smp) cathode band 0.0 8 6 (2.1 8 ) 0.074 (1. 88 ) 0.142 (3.61) 0.126 (3.19) 0.15 8 (4.00) 0.146 (3.70) 0.013 (0.35) 0.004 (0.10) 0.012 (0.30) 0.000 (0.00) 0.01 8 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0. 8 5) 0.036 (0.91) 0.024 (0.61) 0.032 (0. 8 0) 0.016 (0.40) 0.103 (2.60) 0.0 8 7 (2.20) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) ref. 0.100 (2.54) 0.105 (2.67) 0.025 (0.635) 0.030 (0.762) 0.050 (1.27)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
